Illuminating your path towards energy independence

Performance Rated Performance / Product Water Produced: ±15% at 800 PSI / 56 bar, 77°F / 25°C & 35,000 PPM TDS typical sea water
Salt Rejection (Chloride Ion) Minimum 98%, Average 99%
Product Water Temperature Ambient to feed water temperature
Pressure Adjustment Energy Recovery Device
Pressure Monitoring: Feed: SS 0-100 psi pressure gauges for Prefilter in and Prefilter out
Vessel: SS 0-1000 psi pressure gauges for Vessel in and Vessel out
Flow Monitoring: Brine/Reject: 0-5 gal/min rotometer
Product: 0-2 gal/min rotometer
System Control Microprocessor control
Salinity Monitoring Automatic electronic monitoring and porting of product water when below set thresholds
Salinity Range Up to 58,000 PPM TDS (NaCl) (typical Pacific seawater salinity is 35,000 ppm)
Temperature Range Max. 113°F / 45°C, Min. 33°F /0.5°C
System Feed Water Flow: 4 gpm / 15 lpm
Reverse Osmosis Membrane High Rejection/Low Energy, thin film composite, spiral wound, single pass, reverse osmosis membrane element.
Automatic Flush/Manual Flush Auto fresh water flush of system. Manual of Media System.
Chlorine Tolerance < 0.1 PPM
pH Range 3-11 (typical seawater pH is 8)
System Feed Water Pressure Minimum 25 psi /1.8 bar, Maximum 80 psi / 5.6 bar
System Operating Pressure (sea water) Nominal 800 psi / 56 bar
Additional Specifications
Weight 200 lbs w/o storage box Two man portable
Feed Inlet 1" Flat Hose Quick Connect aided withBoost Pump near water source
Brine Discharge 1" Flat hose Quick Connect
Product 1" Flat hose Quick Connect

Electrical Requirements:

Main System 24 VDC at 30 Amps continuous load Startup amperage does not exceed continuous load requirements due to DC soft start circuitry.

650 Watts consumption on Solar.

950 Watts on AC power.

Salt Water cost is 26 Watts per gallon (based on 600 GPD system)

Low Pressure Boost Pump Motor: 24VDC at 5 Amps continuous